Luminous Zelio+ 1100/1700 and Zolt+ 1100/1700 all types of Troubleshooting Problem that of the might occur.
Protection Features.
Luminous Zelio+ sine wave inverter is prepared with many in-constructed protections, which might be as follows:(respective indication is display at the display).
1) Shot circuit: Protects against short circuit in the system.
2) Overload: Prevents both UPS and Battery from damge during and Overload condition.
3) Wrong Wiring: Protects the system in case of wrong wiring connected at the output.
4) Over-Temperature: Prevents burn-outs due to excessive heating by shutting down the Inverter in case of high temperature.
5) Battery deep Discharge: Protects Battery from deep discharge & hence enhances life of the battery.
This section provides with Troubleshooting tips to identify and solve most of the common problem that might occur.
| Problems | Possible causes | Action Recommended |
| Mains Sullpy is Norma but.. a) Main indicator is OFF or UPS is working on Battery. b) Mains ON indicator is glowing but on output. | /Line plug is loose /Dead wall socket /MCB Trip /Mains input too low or High | /Fit plug properly /Check socket /Check MCB /Wait for mains to normalise /Fit plug properly |
| If the display is showing Battery Low(Lbt). | /Battery may be discharged. | /Recharge Battery when mains is available |
| If the display is showing Overload(oLd). | /Inverter tripped due to excess load. | /Reduce the load and reset the power switch |
For Buying New Inverter and Battery Visit My Website